ShenZhen E-BON Industrial Co..Ltd
-Professional manufacturer for the stainless steel products
Browse Categories
News
French Cocktail Shaker Manufacturing: How the Taper Fit Is Engineered
2026-09-23 10:15:36
A French shaker seals with nothing but two pieces of steel — no threads, no lugs, no gasket. That means only two things can go wrong: it leaks while you shake, or it locks shut after you do. Both come from the same set of dimensions. This is the engineering behind that joint: why it has to be a shallow cone rather than a press fit, the four values E-BON sets before cutting tooling (8–12 mm engaged length, 2°–3° taper per side, 0.10–0.25 mm interference, 0.5–1.0 mm axial clearance), why roundness rather than diameter is what buyers feel, why the mouth needs a separate sizing die after springback, and why a plated version cannot share the same mouth dimension as an unplated one.
Etched Stainless Steel Tumbler Bulk Orders: Artwork, Finish, and Defect-Prevention Checklist
2026-09-14 11:03:55
What to confirm before ordering etched stainless steel tumblers in bulk: how etching compares with printing and laser marking, artwork file requirements, base tumbler specs, etched-surface defect checkpoints, and MOQ, packaging and sample timing.
304 vs 201 Stainless Steel Barware: What to Confirm Before You Compare Quotes
2026-09-10 12:24:55
Explains the material difference between 304 and 201 stainless steel, why 201 shows up in aggressively priced barware quotes, where the difference actually shows up after an order ships (corrosion, finish stability, the unreliable magnet-test shortcut), and gives buyers a concrete way to confirm grade in writing before comparing supplier quotes.
How to Evaluate a Barware Supplier: Factory Visit, Audit Support, Third-Party Testing, and Export Documents
2026-09-07 10:50:09
Gives B2B barware buyers a practical way to tell a manufacturer from a trading company, explains what ISO 9001, Sedex 4-Pillar, and BSCI audits actually verify, and covers third-party testing and export documentation to confirm before sending an RFQ.
Cocktail Shaker Quality Control Checklist for Importers and Private Label Brands
2026-09-02 15:02:24
A step-by-step QC checklist for bulk cocktail shaker orders: fit and seal, leak testing, rims and formed edges, dimensions and capacity, finish and logo, function, and packaging—plus how to record defects and decide whether to release or hold a lot.
Cocktail Shaker OEM vs ODM: Which Is Better for Your Project?
2026-08-28 11:55:09
For private label barware brands: how to specify, sample and quote a custom cocktail shaker set, and how to keep its components, finish, branding, packaging and repeat orders consistent as one product.
Custom Cocktail Shaker Sets for Private Label Barware Brands
2026-08-28 11:16:08
A BOFU guide for private label barware brands defining how to specify, sample and quote a custom cocktail shaker set while keeping its components, finish, branding, packaging and repeat orders under one product system.
Why Does French Press Coffee Have Sediment? How Filter Design, Grind Size & Plunger Fit Affect the Cup
2026-08-19 15:39:31
French press sediment does not come from one cause. This article separates normal metal-filter silt from excess sludge and visible grounds, then shows how grind distribution, mesh fineness, filter layers, edge fit and plunger resistance help identify the source.
How to Make French Press Coffee: The Right Ratio, Grind & Brew Time
2026-08-14 14:38:17
A practical French press answer page with an interactive ratio calculator, water-based ratio chart, six-step daily method, ratio and brew-time adjustments, grind guidance, and direct fixes for bitter, weak, sour, muddy, or sediment-heavy coffee.
How to Build a Custom Barware Collection That Looks Like One Brand—Not 12 Unrelated Products
2026-08-08 11:23:25
A practical framework for turning multiple shakers, jiggers, strainers, mugs and accessories into one recognizable barware collection through shared design anchors, controlled variation and range-level sample approval.
Copper-Colored Etched Stainless Steel Hip Flask
- Material: Stainless Steel
- Capacity: Custom
- Pattern: Fixed display design or customer artwork
- Customization: Color, logo and packaging
- MOQ: 100 pcs
- Packing: White box; custom packaging available
- Sample Lead Time: 3–7 days
- Payment Terms: T/T
- Port of Loading: Shenzhen
- Tel: 0755-33221366 / 33221368
- Product Details
Etched Decorative Surface The full-surface etched pattern creates a durable, tactile decoration that will not peel like a printed graphic, giving the flask a stronger long-term decorative finish.
Stainless Steel Body The stainless steel construction provides good corrosion resistance and durability while retaining the appearance of a copper-colored decorative flask with lower maintenance than solid copper.
Custom Pattern Development The existing etched pattern can be used as a fixed design, or customer artwork can be developed for private-label projects. Color, logo and packaging can also be customized within the same product program.
Request a Quote for Your Stainless Steel Product Project
RELATED PRODUCTS
More drinkware options for wholesale, private label, and custom branding projects.
