The surface of the stainless steel grades, processing characteristics and usage 4
E-BON
E-BON
2017-12-29 12:54:22
The maximum carbon content of 316L stainless steel is 0.03, which can not be used for annealing and the use of maximum corrosion resistance after welding. E-BON the most excellent stainless steel company, which provide you with Stainless Steel Bar Set china.
Corrosion resistance: corrosion resistance is superior to 304 stainless steel, and has good corrosion resistance in the process of pulp and paper production. And 316 stainless steel is also resistant to the erosion of the marine and erosive industrial atmosphere.
Heat resistance: 1600 degrees below the intermittent and continuous use below 1700 degrees, 316 stainless steel with good oxidation resistance in the range of 800-1575 degree, it is best not to continuous action of 316 stainless steel, but the continuous use of 316 stainless steel in the temperature outside the scope, the stainless steel has good heat resistance. The carbides of 316L stainless steel are better than the 316 stainless steel, which can be used as the temperature range above.
Heat treatment: anneal at 1850-2050 degree temperature range, then quickly anneal, and then cool quickly. 316 stainless steel can not be hardened by overheating treatment.
E-BON the stainless steel specialist, china Stainless Steel Cocktail Shaker supplier.
Welding: 316 stainless steel has good welding performance. All standard welding methods can be used for welding. In welding, 316Cb, 316L or 309Cb stainless steel packing rod or welding rod can be used in welding. In order to obtain the best corrosion resistance, the welding section of 316 stainless steel needs to be annealed after welding. If 316L stainless steel is used, there is no need for post weld annealing treatment.
Typical uses: heat exchangers for pulp and paper equipment, dyeing equipment, film flushing equipment, pipes, and external materials used in coastal area buildings.
Corrosion resistance: corrosion resistance is superior to 304 stainless steel, and has good corrosion resistance in the process of pulp and paper production. And 316 stainless steel is also resistant to the erosion of the marine and erosive industrial atmosphere.
Heat resistance: 1600 degrees below the intermittent and continuous use below 1700 degrees, 316 stainless steel with good oxidation resistance in the range of 800-1575 degree, it is best not to continuous action of 316 stainless steel, but the continuous use of 316 stainless steel in the temperature outside the scope, the stainless steel has good heat resistance. The carbides of 316L stainless steel are better than the 316 stainless steel, which can be used as the temperature range above.
Welding: 316 stainless steel has good welding performance. All standard welding methods can be used for welding. In welding, 316Cb, 316L or 309Cb stainless steel packing rod or welding rod can be used in welding. In order to obtain the best corrosion resistance, the welding section of 316 stainless steel needs to be annealed after welding. If 316L stainless steel is used, there is no need for post weld annealing treatment.
Typical uses: heat exchangers for pulp and paper equipment, dyeing equipment, film flushing equipment, pipes, and external materials used in coastal area buildings.
If you want to get more information about E-BON, you can click cocktail shaker manufacturer china.