Home > News > Industry News > Construction and maintenance o.....

News

Construction and maintenance of anticorrosive wood

  • Author:E-BON
  • Source:E-BON
  • Release on :2017-09-21
Fixed: laying the keel with expansion screws fixed on the ground, expansion screws used nylon (anti aging better), iron expansion pipe shall be painted with antirust paint, and then came the rotten wood laying fortification; activities: a front with stainless steel cross screw in connection with wooden dragon bone; B screw the keel is fixed on the wooden side, a few blocks as a whole, which can not damage the ground structure, also can free disassembly and cleaning; C suspension laid the keel, can be connected into a frame / derrick structure in ground leveling, and then came the fortification of rotten wood.

The treatment of wooden structure base: in design and construction, the air circulation between the wood and the ground should be maintained sufficiently, and the service life of the wooden structure base can be prolonged more effectively.

The production and installation of wood preservative, the gap between the wood preservative for 0.2-1CM (according to the moisture content of wood and then decide the size of the gap, the moisture content of wood more than 30% should not be more than 0.8CM as well) can avoid the rain water and wood preservative expansion;
A square column with a thickness greater than 50mm or greater than 90mm can be opened in the back to reduce cracking. E-BON the most excellent stainless steel company, which provide you with oem Stainless Steel Mearsuring Spoon.

Hardware application of stainless steel, galvanized or copper (mainly to avoid days after rust, and the influence of connecting fastness) connection installed please pre drilled to avoid cracking wood preservative.

The use of the existing size and shape as far as possible, processing damaged parts and outdoor protective coatings with preservatives; because wood preservative itself is semi rough part after spreading and wood moisture content below 20%, then sanding again, if you want to have a better effect, the surface clean up after brushing or outdoor protection paint (such as protective coating color should be fully stir). In rainy days, it is best to use plastic cover, such as the weather and outdoor paint brush. Note: 24 hours after brushing, water should be avoided.
Surface with outdoor protective paint or oil base coating after brushing (only once), in order to achieve the best effect, within 48 hours to avoid moving around or moving heavy objects, so as not to destroy the anti-corrosion wooden surface has formed protective film. If you want to achieve better anti dirty effect, when necessary, surface layer and then do two special outdoor varnish treatment.

Due to the special use in outdoor environment, cracks and fine deformation of wood preservative are normal, and their corrosion resistance and structural strength are not affected. E-BON the stainless steel specialist, Kitchenware Supplier china.

General outdoor wood protective coating is permeable, in the wood fiber will form a protective film, can effectively prevent water erosion of wood, cleaning can be used to clean general detergent, tools available brush.

1 to 1.5 years to do a maintenance; with dedicated wood, water-based paint or oil-based paint can be painted, especially reminded: workers should be clean hands to eat. When cleaning clothes, don't wash them with other clothes.

If you want to get more information about E-BON, you can click China Kitchenware Supplier.