Home > News > Industry News > Specification and size of stai.....

News

Specification and size of stainless steel

  • Author:E-BON
  • Source:E-BON
  • Release on :2018-01-25
Stainless steel sheet contains rolled and original plate rolls: E-BON the stainless steel specialist, Stainless Steel Canister Supplier.

1, the rolls are divided into cold rolled and hot rolled rolls, cutting edge rolls and edge rolls.

2, the thickness of the cold rolled coil is generally 0.3-3mm, and there is a cold rolling plate with a thickness of 4-6mm. The width is 1m, 1219m and 1.5m, which is expressed in 2B.

3, the thickness of the hot rolled coil is generally 3-14mm, and there are 16mm rolls, and the width is 1250, 1500, 1800, 2000, which is expressed in NO.1.

4, a roll with a width of 1.5m, 1.8m and 2 meters.

5, the width of the hair curl is generally 1520, 1530, 1550, 2200, and so on.

6, in the price of the same type of cutting and edge rolls of the general difference of about 300-500 yuan.

7, the volume can be fixed according to the requirements of the customer. After Kaiping machine Kaiping, it is called open plate. Cold rolling generally Kaiping 1m*2m, 1219*2438 is also called 4*8 feet, hot rolling generally Kaiping 1.5m*6m, 1.8m*6m, 2m*6m, according to these sizes open the standard plate or fixed plate.

The original plate is also called single rolling.
1, the thickness of the original board is generally 4mm-80mm, also 100mm and 120mm, this thickness can be fixed.

2, the width is 1.5m, 1.8m, 2m, and the length is more than 6 meters.

3, characteristics: the original flat plate volume is large, high cost, difficult to acid pickling, not easy to transport.

If you want to get more information about E-BON, you can click Hammered Moscow Mule Copper Mugs.